Bay Area Zaino
a
 
a
a
  
a
a
a
a
a
a
a
 Zaino Products   Microfiber Products   Application Tips    Home      Order Products

  

  Z-AIO All-In-One   Z-CS Clear Seal  Z-PC Fusion Dual Action Paint Cleaner   Z-2 Pro Polish For Clear Coat   Z-3 Polish For Single Stage Paint   Z-5 Swirl Mark Remover   Z-6 Gloss Enhancer   Z-7 Car Wash   Z-8 Grand Finale   Z-9 Leather Cleaner   Z-10 Leather In A Bottle   Z-12 Glass Polish   Z-14 Plastic Polish   Z-16 Tire Gloss   Z-18 Clay Bars   ZFX Flash Cure Accelerator   314 Applicator
Z-PC Fusion Dual Action Paint Cleaner
  • Safely removes minor scratches, swirls, oxidation, wax buildup and other blemishes
  • Features the world's first true self-dissolving, fused tri-particulate, diminishing abrasive system
  • 100% compatibility with all painted surfaces and Zaino paint products
  • Water-based formula means no mess, no staining, and easy clean up - no fillers or oils
  • Can be used in sun or shade on cool surfaces
  • Perfect your paint with Zaino Z-PC Fusion
  • NOTE: Zaino Z-PC Fusion b>IS ABRASIVE and should only be used when necessary. Z-PC Fusion is not intended for frequent use.
  •   Fusion,is really best used with a machine. As you work it, it breaks down into finer and finer particles which really "polishes" the paint. "Polishes" in this sense of the term, means it is cleaning and removing the fine scratches to give a swirl free finish - It is NOT polishing the paint as in adding protection, that is Z-5, and Z-2's job.

    Think of it as a Jeweler's polish for your paint. It is extrememly fine - so keep in mind it is abrasive, but extremely mild. Much finer than other abrasives I have used.

    Doing Fusion by hand, you have to make sure you really break it down, which means some serious work, compared to other Zaino products. Again it is a relative thing, but I worked with a detailer who used Fusion by hand, and did not work it enough, and actually created a bigger mess, than when he started the job. I gave him a hand and we kept working the Fusion until we just had a shine starting to come up using a Porter Cable, we eliminated the swirls and created an incredible finish. I used a white foam polishing pad, which was the least aggressive of the pads in that line. One more time, because this is important: Fusion starts out as a very mild abrasive paint cleaner. As you work it, it breaks down into a finer abrasive - which eliminates the surface swirls The more you work it the finer it gets and will "polish" your paint finish. You must work it until it is broken down into a very fine dust and almost dry. As with all Zaino products, use it sparingly. I don't want to discourage you from doing it by hand, just want to make sure you are aware of how it works, to get the best results.